Voopoo has released the Argus P1 Pod Kit Gunmetal. The device received a GENE board. AI 1.2 with automatic power adjustment ranging from 5 to 20 watts and a capacious battery with very fast charging.
The miniature device uses the GENE function board. AI 1.2, which provides automatic optimization of output power depending on the intensity of the airflow. Adjustment of the tightening is carried out using the slider. The output power can vary from 5 to 20 watts. An integrated 800 mAh battery acts as a power source. A full charge can be achieved in no more than 18 minutes thanks to the advanced USB Type-C port.
The Argus P1 pod cartridge near me features a standard design and various built-in coils for 1.2 and 0.7 Ohm. In addition, a version of the kit with one cartridge and a pair of replaceable evaporators is provided.
Vandy Vape has released the BSKR Elite Kit. The all-in-one device was powered by an external 18650 battery, its own maintenance-free atomizer, a detachable 510 connector and cigarette filters.
The universal vape pen kit in stock provides a standard security system and a maximum output voltage of 3.6 volts. Power is supplied by an external 18650 battery. The charge level is displayed in green, orange and red as it decreases. USB Type-C is responsible for charging with a current of 1A. The resistance can vary from 0.2 to 3.0 ohms.
The complete tank is fixed on the device by means of the bayonet system – half a turn. The volume of the reservoir is 3 or 2 ml, depending on the kit version. Filling holes are located at the top, under a removable cover. In stock, two replaceable grid evaporators from the VVC Coil series are provided. The intensity of tight blowing is adjusted using a ring with four small round perforations. In addition to everything, the fitted delrin drip tip can be replaced with a soft filter imitating a cigarette.
The package includes two evaporators, a set of soft filters, an adapter, orings, a USB cable, a certificate and instructions.
The minimalist housing consists of a robust zinc alloy, while the slim design creates a pleasant hand comfort. Characterized by delicate ornaments, these are reminiscent of a medieval artefact that emerges as a masterpiece from Uwell’s forge and can be worn as a pendant around the neck using the lanyard provided.
Under the noble facade works a reliable 370mAh battery, which generates an output of 11 watts using the automatic pull mechanism, while a three-color LED shows the current charge level. In addition, various protective mechanisms ensure appropriate security when using the device.
The set-up is supplemented by a magnetically holding Uwell Sculptor pods, which has a capacity of 1.6ml and is filled via the side-fill system. In addition, the proven Pro-Focs technology in combination with the built-in 1.2 ohm mesh coil harmoniously rounds off the intensive aroma development and dense vapor development.
Smoant has released the VIKII PRO Pod Kit. The minimalist device was provided with a maximum power of 10 watts, an integrated battery with a reserve of 700 mAh and a pair of various replaceable 3 ml cartridges.
Ignition occurs with the help of an air activator. An integrated battery with a reserve of 700 mAh is used as a battery.USB Type-C is responsible for charging with a current of 0.5A.The minimalistic board provides the necessary security system and supports a maximum output power of 10 watts.
The Smoant Vikii pro pod cartridge is sold in two different copies with built-in 1.2 and 1.0 ohm tank.Fixation on the device is carried out by means of a magnetic connector.
The tank features an increased capacity of 3 ml and an accessible refill port.Please go to best online vape shop to order.
Today,I’ll be covering you the Vandy Vape Pulse AIO.5 Kit.It comes with the Pulse AIO and has been updated with a new square button and matching panel.Compatible with all previous accessories, it accepts 3.7ml capacity of RBA tank and 5ml capacity of pre-built tank.
The Vessel DIY RBA tank has a curved 180-degree airflow and Vessel Pre-built tank fit for all VVC coils.And, this all-in-one setup also features 80 watts by a single 21700/20700/18650 battery, a USB-C charging port, customizable buttons and plates, a high number of coil options, a multitude of safety protections, and a plethora of modes including temperature, voltage, variable wattage, and bypass.
With the compact Drag Q Starter kit in USA,Voopoo presents a modern pod system with an elegant and almost luxurious look.With its stylish design,the ITO-X pod is the ideal complement to the elegant pod mod and offers the highest MTL and RDL steam enjoyment with extremely comfortable handling.
With the integrated 1250 mAh battery,the elegant Drag Q kit has an output power of 8W to 25W and can also be quickly recharged via the USB Type-C connection with up to 2 A charging current.An LED var on the front not only looks great,but also takes on two core tasks.
The stylishly designed Voopoo ITO-X pod tank offers space for 3.5 ml of liquid in its transparent tank and is also protected against leakage by four sealing rings on the ITO coils.
Vaporesso has released the Vaporesso Gen Fit 40 Kit Sierra Blue. The compact kit included a concise mod with a 2000 mAh battery and power from 5 to 40 watts, as well as an iTank X tank with two different evaporators.
The Vaporesso GEN Fit 40 box mod in USA produces power in the range from 5 to 40 watts.For comfortable adjustment and tracking of the necessary information, a standard one-color interface is provided. Power is supplied from a built-in battery with a reserve of 2000 mAh. USB Type-C is responsible for charging with a current of 2A.
The complete iTank X tank Vaporesso has an advanced filling system with a sealed pressure valve located on top, under a removable lid. The volume will be 3.5 or 2 ml, depending on the selected flask. The maintenance-free base houses a pre-installed 0.6 ohm coil from the GTX series. In addition, an alternative 1.2 ohm mesh option is provided in stock.